A Barrett company - serving Santa Rosa, CA
A living room with a wall of new windows and a sliding glass door
PGT · Santa Rosa

PGT Construction Service in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
New double-hung windows in a dining room
A new front entry door with glass sidelights
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Santa Rosa Homeowners Choose PGT Construction

We provide independent PGT construction service in Santa Rosa: diagnosing and repairing PGT windows and sliding doors, replacing failed impact units, and re-flashing older aluminum installs that were never detailed for this climate. What makes our PGT work different is that we identify the series before we touch it – a WinGuard Vinyl slider and a thermally-broken aluminum EnergyVue unit fail in different places, and the fix differs too. We’re Barrett & Sons Construction, an independent PGT service provider. We are not affiliated with, authorized by, or endorsed by PGT, and we don’t claim to be. We read the same published PGT installation and anchoring specs the manufacturer publishes, source PGT-compatible hardware, and tell you plainly when repair is the wrong answer. Call (866) 864-4083 to schedule a free estimate.

Call (866) 864-4083

Why Trust Barrett & Sons Construction Santa Rosa for Your PGT Construction?

A new bay window with a cushioned seat

Our technicians have up to 28 years of experience, and a good share of that has been spent on PGT aluminum and vinyl units in Sonoma County homes. That matters because PGT has made a lot of product families over the years, and the parts don’t cross over. A roller that fits one WinGuard slider generation won’t seat right in another. We check the label, measure the panel, and match the hardware to the unit in front of us rather than guessing from a photo.

Our work is warranty-safe by design. We use OEM or exact-match replacement rollers, weatherstripping, screens and glazing where those parts are still available. We don’t drill new holes in a frame to make a wrong bracket fit, and we don’t cut into a sealed unit. When a part is discontinued, we say so and use dimension-matched aftermarket hardware with the trade-offs explained up front.

Every scope, every allowance, and every price change arrives as a written change order before work starts. Permits get pulled and inspections signed on every eligible job. And the whole thing is backed by our written 90-Day Done Right Promise: if it’s not done right, one call brings us back. Tom Barrett publishes his name, his address, and his license number – look it up before you sign anything.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common PGT Construction Problems We Fix in Santa Rosa

Santa Rosa sits at the epicenter of California’s wildfire-urban interface, so the windows and doors here aren’t just openings in a wall. They’re part of an ignition-resistant assembly, and when they fail, they fail in ways that matter more than a draft. These are the five calls we get most on PGT units in Santa Rosa.

  • Hardened weatherstripping and worn felt pile on sliding glass door tracks. The pile flattens and the weatherstripping stiffens after years of hot, dry summers. Once it’s gone, wind-driven rain gets in during the winter storms and smoke-season air gets in all summer. It’s usually a straightforward replacement with matching pile height.
  • Roller and track wear on WinGuard sliders. The panel starts to drag, jumps the track, or won’t latch in high wind. Flat-spotted rollers and grit-packed tracks are the usual culprits, and a panel that won’t latch is a real problem on a wind-rated door. New rollers and a cleaned, re-aligned track fix most of these.
  • Seal and glazing failure on impact units. Fogging between the panes on a WinGuard Aluminum or WinGuard Vinyl impact window means the seal is gone. On laminated impact glass, the interlayer can also degrade after years of sun exposure. A fogged unit isn’t fixable in place – the sealed unit gets replaced.
  • Water intrusion and rot at the rough opening and sill. This is the one contractors from neighboring cities miss. On older PGT aluminum installs, original flashing or panning was often done to a standard that predates current WUI detailing. Water works in behind the frame, the sill rots, and the leak shows up as a stain on the drywall a room away.
  • Hardware and latch failure after a rebuild. In Coffey Park, where nearly every home has been rebuilt with ignition-resistant features, we see PGT units that were installed correctly but whose handles, keepers, and latches wear out on a faster schedule than the glass. Small parts, real function.

PGT Parts & Our Repair-vs-Replace Approach

Installers setting a new window and checking it for level

Parts sourcing for PGT is a matching exercise, not a shopping trip. We identify the series and generation first, then go after OEM or exact-match replacement rollers, weatherstripping, screens and glazing. For discontinued profiles, we use dimension-matched aftermarket hardware. We don’t keep PGT parts in local stock – what a job needs gets sourced for that job, measured against the unit. That’s slower than grabbing a generic roller off a shelf, and it’s the only way the door works right afterward.

Repair versus replace comes down to three questions. Is the sealed unit still sealed? Is the frame and sill sound? And are the parts still available? If a fogged impact unit can’t be re-sealed and the frame is fine, the honest call is replacing that glazed unit, not the whole window. If the sill has rotted through, patching it is money spent twice. We’ll show you what we found and tell you which way we’d go. Call (866) 864-4083 to get a straight answer on your PGT unit.

Our PGT Service Process – Step by Step

  1. 1
    Diagnosis. We identify the PGT series, check the panel and frame for square and movement, and test the latch, roller and weather seal. We look at the sill and rough opening for water staining, not just the glass. You get findings in writing.
  2. 2
    Repair or installation. For repairs, we pull the panel, replace rollers and weatherstripping with matching parts, and clean and re-align the track. For installations, we follow PGT’s published anchoring and flashing specs, which on Santa Rosa homes means detailing to Chapter 7A ignition-resistant standards.
  3. 3
    Test. The panel gets cycled open and closed, we check for a square latch, and we water-test the sill and flashing on any install or re-flash. You see it work before we pack up.
  4. 4
    Warranty and handover. Every completed job is covered by the written 90-Day Done Right Promise. If a latch sticks or a seal leaks, one call brings us back. Every eligible job has its permits pulled and inspections signed.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

PGT Products We Service & Install in Santa Rosa

We work on the PGT product families most common in Santa Rosa homes. That includes PGT WinGuard Aluminum impact windows and sliding glass doors, the line most often found on rebuilt homes in Coffey Park and Fountaingrove. PGT WinGuard Vinyl impact windows and doors show up too, and the vinyl frames behave differently from aluminum in sun and wind. We also handle PGT Architectural Series custom aluminum units, and PGT EnergyVue thermally-broken aluminum single-hung and slider units – the ones that turn up on older Santa Rosa homes and where the roller and weatherstripping calls usually come from.

We Also Service These Brands

PGT is one line in a much wider bench. We also service and install KraftMaid cabinetry on kitchen work, Kohler fixtures on baths, GAF roofing systems, and Master Halco fencing. That matters because a window problem is often part of a bigger job: a sill rot that turns into a wall repair, a slider replacement that comes with roof repair if the flashing failed above it. You get one crew and one written scope instead of three contractors handing each other the blame.

FAQs – PGT Construction Service in Santa Rosa

A new concrete driveway with a paver border

Service Santa Rosa Price Range
Window Replacement $4,500 – $15,000
Impact Window Installation $8,000 – $25,000
Roof Repair $400 – $1,800

Call (866) 864-4083 for an exact quote – estimates are free. A written line-item scope with change orders in writing means no surprise invoice at the end.

Book Your PGT Service in Santa Rosa, CA

If a PGT slider is dragging, a WinGuard impact unit has fogged, or the sill on an older aluminum install is showing water damage, call Barrett & Sons Construction Santa Rosa at (866) 864-4083 to schedule your free estimate. A live person answers the phone around the clock. You’ll get a written scope, a fixed price, and the 90-Day Done Right Promise on the back of it.

Written by the team at Barrett & Sons Construction.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A finished backyard cottage with a small covered porchA new roof with clean valleys and new flashingA new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patio

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 864-4083
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Barrett & Sons Construction Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch