







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors in Santa Rosa: What to Know First
Barrett & Sons Construction Santa Rosa provides independent PGT window and door service across Santa Rosa, and most jobs – a failed balance, a fogged glass unit, a patio door that won’t slide – are quoted free, scheduled within days, and finished in a single visit once the right parts are in hand. Plan on $450 to $1,400 for a typical single-unit repair, or $4,500 to $15,000 for a full window replacement in a Santa Rosa home. As an independent PGT service provider, we’re not affiliated with or authorized by the manufacturer, and we tell you that upfront because you deserve to know exactly who’s standing in your living room.
This page is for homeowners who already have PGT windows and doors in Santa Rosa – whether it’s an aluminum series from the 1990s or a newer WinGuard impact unit – and want someone who knows the product line, not a crew learning on your dime. Call (866) 864-4083 and a person answers.
- Typical repair: $450 – $1,400 per unit
- Window replacement: $4,500 – $15,000
- Impact window installation: $8,000 – $25,000
- Estimates: free, in writing, with line items
How PGT Products Fail – and How We Fix Them

PGT built a lot of windows and doors for a lot of Santa Rosa homes, and the failures we see come back to the same handful of causes. Here’s what we run into, what’s actually behind it, and what we do about it.
- Fogged insulated glass on PGT aluminum and vinyl series. When you see that milky haze between the panes, the seal on the insulated glass unit has failed – it’s not dirt and it’s not condensation you can wipe away. We replace the glass unit itself rather than the whole window, which keeps the frame and hardware and saves you most of the cost of a new window. This comes up constantly on units older than fifteen years facing the afternoon sun.
- Failed balances and hard-to-open single-hungs and double-hungs. PGT’s block-and-tackle and spiral balances wear out, and the sash starts dropping or jamming partway up. We match the balance by series and sash weight – a generic balance off a shelf will work for a few months and then fail again. Getting the right part the first time is most of the job.
- Sliding and patio doors that won’t roll. PGT sliding doors ride on adjustable rollers and a track that fills with grit. Nine times out of ten it’s the rollers and the track, not the door. We pull the panel, replace the rollers with a matched set, clean and true the track, and adjust the panel so it glides with two fingers again.
- Condensation and water intrusion at the sill. Santa Rosa’s wet winters and dry summers work on the seals and weatherstripping year after year. When we find moisture at the sill on a PGT unit, we look at the seal, the weep holes, and the flashing – because a window that leaks is usually telling you the installation or the exterior seal let go, not that the window itself is bad.
- WinGuard impact units with a damaged latch or hinge. Impact-rated PGT products are built to a higher standard, and their hardware is specific to the series. A broken latch on a WinGuard door isn’t something you swap with a hardware-store part without compromising how the door seals. We source the matching hardware so the door keeps doing what it was rated to do.
One thing PGT’s own site won’t tell you: in Santa Rosa, the west- and south-facing glass takes the worst of it, and that’s where we see insulated glass seals fail first – the daily heat cycling on that side of the house is harder on the seal than anything else on the window.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our PGT Windows & Doors Process
- 1
We come look, and we listen. A crew member walks the windows and doors with you, notes which units are acting up and which have been, and checks the seals, tracks, balances, and glass on each one. No charge for the visit inside the county.
- 2
We diagnose the real cause. Fogged glass, a sticky sash, a door that drags – each points to a different fix. We tell you what’s actually wrong, and if a window isn’t worth repairing, we say so.
- 3
We make the parts call, in writing. OEM parts where they matter for fit and warranty, quality aftermarket where they’re the smarter buy. Either way, the parts and the price are on the estimate before we order anything.
- 4
We do the work. Glass units, balances, rollers, weatherstripping, hardware – done by crew members who carry the Barrett & Sons name and have been background-checked.
- 5
We test it in front of you. Every repaired window opens, closes, and latches; every door rolls and seals. You try it yourself before we pack up.
- 6
We back it in writing. Every completed job carries the 90-Day Done Right Promise. If something isn’t right, one call brings Tom back.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Windows & Doors Costs in Santa Rosa

Santa Rosa pricing runs on the moderate side for the Bay Area, and PGT repairs are usually more affordable than people expect because the frame stays. Here’s what common jobs run:
| Job | Typical Range |
|---|---|
| Single window repair (balance, roller, hardware) | $450 – $1,400 |
| Fogged insulated glass unit replacement | $500 – $1,200 |
| Sliding patio door roller and track service | $350 – $900 |
| Door installation | $450 – $2,500 |
| Window replacement (whole home) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
What moves the price: the number of units, whether we’re replacing glass or whole windows, OEM versus aftermarket parts, and how far a door has drifted out of true. We give you a written line-item estimate, and any change in scope comes to you as a written change order before we touch the job. Call (866) 864-4083 for yours – estimates are free.
Why Santa Rosa Homeowners Call Barrett & Sons Construction Santa Rosa for PGT Work
Because you’ve already been burned once, and you want a name you can verify. Tom Barrett publishes his name, his address, and his license number – look it up before you sign anything. Every eligible job gets its permits pulled and inspections signed.
Our technicians have up to 28 years of experience, which means they’ve worked on PGT windows and doors long enough to know what’s behind a symptom before they open the panel. When a PGT repair turns into something bigger – a door that needs a whole new unit, glass that won’t match the rest of the house – we also carry the depth to handle it, with KraftMaid, Kohler, GAF, and Master Halco among the brands we work with. You get one crew, one written scope, and the 90-Day Done Right Promise on the finished job. Ask anyone on your street, or look up the number yourself.
FAQs

Most PGT product warranties cover the glass and frame for a set term, and some run long enough to still be active on a 1990s or 2000s install. We check the original paperwork with you before we touch anything, because repairs done right don’t void a warranty – but a botched repair can. Call (866) 864-4083 and we’ll walk through what you have.
On most PGT series, yes. Glass units, balances, rollers, and hardware for current and recent series are available, and where a series is discontinued we match to a quality aftermarket part that fits the same way. We tell you which we’re using on the estimate, before we order.
Repair if the frame is sound and it’s a glass, balance, or hardware problem – that’s the majority of what we see. Replace if the frame itself is rotted or warped, or if several units in a room have failed at once and the math tilts toward new ones. We’ll give you both numbers so you can see the trade-off.
Most repairs are quoted free within a few days and finished in a single visit once the parts are in hand. Exact timing depends on the series and part availability. Call (866) 864-4083 and a live person will give you a real window, not a guess.
Yes, when the job requires it. Like-for-like repair usually doesn’t need one; full window replacement often does, and we pull it and get the inspection signed. The permit inspector works for you, not for us – that’s why we like him.
Written by the team at Barrett & Sons Construction Santa Rosa, serving Santa Rosa and nearby areas.
Ready to get your PGT windows and doors working right? Call Barrett & Sons Construction Santa Rosa at (866) 864-4083 for a free estimate. We’ll come look, put the scope and the price in writing, and stand behind the work with the 90-Day Done Right Promise.












