







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Bathroom Remodeling in Santa Rosa: What to Know First
We provide independent Kohler bathroom remodeling in Santa Rosa, and a full bathroom remodel typically runs $9,000 to $28,000 depending on the fixtures, tile, and layout. A walk-in shower installation usually takes about two to three weeks once materials are on site; a full gut remodel runs longer. We’re an independent Kohler service provider, not affiliated with or authorized by Kohler. If you own a Kohler toilet, shower system, or tub and you’re ready to rebuild the room around it, call (866) 864-4083 and we’ll come look. Estimates are free and the scope stays in writing.
This page is for Santa Rosa homeowners who already have Kohler in the house and want the remodel done right around it, not for someone shopping a brand name.
How Kohler Products Fail – and How We Fix Them
Kohler fixtures hold up well, but they have known failure points, and a remodel is the moment to deal with them honestly instead of tiling over the problem.
- Kohler Memoirs and Portrait one-piece toilets – the fill valve and flush tower. The fill valve in these tanks wears out first, usually showing up as a toilet that runs for a few seconds after the flush or fills slowly. The tower seal also hardens. We replace with a genuine Kohler fill valve or a quality aftermarket valve we can stand behind, then reset the tank and test. If the bowl is sound, there’s no reason to replace the whole toilet.
- Kohler Choreograph and tile shower systems – the door and the caulk line. Water gets behind the door track and the caulk seam at the base long before the wall panels fail. In Santa Rosa, our wet winters and dry summers expand and contract that seam, and the caulk gives out. We pull the door, re-set the base, and re-caulk with a mold-resistant product made for showers rather than a generic tube of it.
- Kohler cast iron tubs – the drain and the overflow gasket. Cast iron isn’t the problem; the rubber gasket at the overflow plate dries out and drips down the outside of the tub, which rots subfloor quietly. We pull the overflow, inspect the subfloor, replace the gasket, and check for soft spots before a tub-to-shower conversion covers it up.
- Kohler shower valves – the cartridge and the rough-in. A Kohler valve that runs hot-cold at the handle usually needs a cartridge, not a new valve. The trap is that a remodel often moves the plumbing, and a sixty-year-old valve body behind the wall may not have replacement parts. We identify the exact valve model before we open the wall, so we know whether we’re keeping it or replacing it.
- Kohler sinks and vanities – the undermount seal. Undermount Kohler sinks work loose from the counter over time, especially where the silicone fails. We re-set the sink, check the counter for cracks around the cutout, and replace the drain assembly if it’s corroded. A vanity replacement is often cheaper than re-setting an old sink in a failing top.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Kohler Bathroom Remodeling Process
- 1
Walk-through and diagnostics. We look at what you have: model numbers where visible, valve type, tub or shower base condition, and any water damage. We don’t guess on parts.
- 2
Parts decision in writing. We lay out OEM Kohler parts versus quality aftermarket, and which one lasts. You see the price difference before anything is ordered, and any change comes as a written change order.
- 3
Permits and scope. Every eligible job gets permits pulled and inspections signed. If plumbing or electrical moves, that’s on the permit.
- 4
The remodel itself. Demo, rough-in, tile, fixtures, and finish. Kohler fixtures get set with proper backing and the manufacturer’s clearances, not forced into a spot that fits “close enough.”
- 5
Testing. We run every Kohler valve, flush every toilet, and fill every drain before we call it done.
- 6
Cleanup and guarantee. Haul-out, final walk-through, and the written 90-Day Done Right Promise on the job: if something isn’t right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterWhat Kohler Bathroom Remodeling Costs in Santa Rosa

Here’s what the work runs in Santa Rosa. These are real ranges, not a phone-quote number that changes at the door.
| Job | Typical Range |
|---|---|
| Full Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
What moves the price: whether the plumbing stays where it is, tile choice, whether the subfloor needs repair, and whether you’re keeping the Kohler fixtures or replacing them. A tub-to-shower conversion that keeps the drain in place is usually a good bit cheaper than one that moves it. Call (866) 864-4083 for a free estimate and a written scope with allowances documented.
Why Santa Rosa Homeowners Call Barrett & Sons Construction Santa Rosa for Kohler Work
We’ve been owner-operated since 1998, and Tom Barrett and his sons are on-site most days, so you’re not calling a call center and getting a stranger. Every price change arrives as a written change order before work moves; the allowance that isn’t on paper is a surprise waiting for a date. Our technicians have up to 28 years of experience, and they know the difference between a Kohler cartridge and the aftermarket one that quits in a year. We carry KraftMaid, GAF, PGT, and Master Halco across the trades too, but on a Kohler bathroom job the brand that matters is the one you already own. The permit inspector works for you, not for us, and every job carries the written 90-Day Done Right Promise.
FAQs

Will my Kohler warranty be affected if you remodel around it? No, if the work is done properly and the existing Kohler fixture isn’t altered. We’re careful to install and set fixtures to Kohler’s specs, keep the model number, and avoid anything that would void coverage. If we’re replacing a Kohler part, we tell you whether OEM or aftermarket makes sense for the warranty.
Can you get Kohler parts for an older bathroom in Santa Rosa? Usually, yes, for current and recent model lines; older discontinued valves may require a substitute or a full valve replacement. We identify the model before we open the wall so there’s no surprise mid-job. Call (866) 864-4083 to schedule a free look.
Is it cheaper to repair my Kohler fixture or replace it during the remodel? Repair is cheaper when only the cartridge, fill valve, or gasket has failed, and the bowl or body is sound. Replace when the fixture is cracked, the valve body is discontinued, or the subfloor around it is rotten. We’ll give you both numbers and let you decide.
How long does a Kohler bathroom remodel take? A walk-in shower installation is typically two to three weeks; a full remodel runs longer depending on tile and permits. We give you a written schedule up front. Estimates are free, so call for a real answer on your room.
Do you pull permits for Kohler bathroom remodels in Santa Rosa? Yes, on every eligible job. Plumbing and electrical work gets inspected and signed. If your last contractor told you permits were optional, that’s exactly why we don’t skip them.
If you’ve got Kohler in the bathroom and a remodel on your mind, call Barrett & Sons Construction Santa Rosa at (866) 864-4083 to schedule your free estimate. We’ll look at what you have, put the scope and allowances in writing, and tell you the honest price before any work starts.
Written by the team at Barrett & Sons Construction Santa Rosa, serving Santa Rosa and nearby areas.












