







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Rosa Homeowners Choose Owens Corning Construction
Barrett & Sons Construction Santa Rosa provides independent Owens Corning construction service in Santa Rosa, CA – roof replacement and repair with Oakridge and Duration shingles, and insulation work with PINK Next Gen batts and FOAMULAR NGX rigid board. What sets our Owens Corning work apart is installation to the manufacturer’s written instructions, not just the material on the truck: correct nailing pattern, required starter course, matched underlayment, and attic ventilation that lets the shingles last. We’re an independent contractor and are not authorized, sponsored or endorsed by Owens Corning. Call (866) 864-4083 for a free estimate.
Why Trust Barrett & Sons Construction Santa Rosa for Your Owens Corning Construction?

We handle Owens Corning products most weeks of the year – Duration and Oakridge shingles on Wine Country roofs, PINK Next Gen Fiberglas batts in kitchen and bath remodels, FOAMULAR NGX rigid board behind new siding and stucco. Our crew members have up to 28 years of experience, and they know how these materials behave in Sonoma County heat, wind and wildfire season. That matters more here than in most places. A roof that passes inspection in a mild climate can fail at the first Diablo wind event if it was nailed too high or skipped the starter course.
We use genuine Owens Corning shingles, underlayment and insulation where the system depends on matched performance. Mixing brands inside one roof assembly voids the wind and fire ratings you paid for. For accessories like ridge vent, drip edge and fasteners, we choose quality aftermarket parts that meet code, and we tell you which is which on the estimate.
Barrett & Sons Construction Santa Rosa is not affiliated with Owens Corning. We’re an independent construction company, and we say so plainly. What we do promise: scope in writing, allowances in writing, change orders in writing. Every eligible job gets permits pulled and inspections signed. Every completed job carries the written 90-Day Done Right Promise. Call (866) 864-4083 and a live person answers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Owens Corning Construction Problems We Fix in Santa Rosa
Here’s what we actually find on Owens Corning roofs and insulation jobs around Santa Rosa, and why it happens.
- Wind uplift on Duration shingles along ridges and eaves. Duration shingles are rated for high wind, but only when installed with the required starter course and the specified number of nails placed in the nail line. When a crew nails too high, or skips starter strip at the eaves, wind gets under the first course. After a gusty spring in Santa Rosa, you’ll see tabs lifting and granules collecting in the gutter.
- Oakridge shingles curling and losing granules on low-slope or poorly vented roofs. Oakridge is a solid three-tab-class shingle, but it needs proper attic ventilation to shed heat. On Santa Rosa roofs where ventilation was never upgraded – common on postwar tract homes in the east and south – trapped heat cooks the shingle from below and shortens its life by years.
- PINK Next Gen batts compressed into narrow wall cavities. R-value depends on thickness. When batts are stuffed into a 2×4 cavity that wanted a different product, or left exposed to moisture during a remodel, the insulation underperforms and can invite mold behind the drywall.
- FOAMULAR NGX rigid board left unprotected above grade. Extruded polystyrene needs a weather barrier and flashing. Board butted tight to siding or stucco without proper detailing lets water wick behind the wall. We see this on rebuilds where the sequence got rushed.
- Mixed-brand roof assemblies that break the fire rating. Santa Rosa sits at the epicenter of the wildfire-urban interface. Chapter 7A ignition-resistant standards apply, and swapping in a different brand’s underlayment or ridge vent can void the assembly’s ratings. We check the whole system, not just the top layer.
A quick scenario: a homeowner notices shingle tabs lifting or granules in the gutter after a windy spring. The usual cause is an Owens Corning Duration or Oakridge roof that was nailed too high or skipped starter strip at the eaves, so wind gets under the course. A qualified local roofer typically hand-seals or replaces the affected courses, checks attic ventilation and flashing, and confirms the nailing pattern meets the manufacturer’s installation instructions before signing off.
Owens Corning Parts & Our Repair-vs-Replace Approach

Owens Corning doesn’t sell its shingles through a separate “OEM parts” channel the way a carmaker does. The genuine material is the shingle itself, plus the underlayment and accessory system specified for that roof. We use genuine Owens Corning shingles, WeatherLock self-adhering ice-and-water underlayment, and PINK Next Gen insulation where the job depends on matched performance. Ridge vent, drip edge and fasteners we source to code, and we tell you what’s aftermarket on the written estimate.
We don’t claim to stock Owens Corning parts locally. Materials are ordered for each job after the scope is set, so you’re not paying for inventory sitting in a warehouse.
Repair or replace? If a roof has a few isolated failures – a lifted course, a torn ridge cap, a flashing leak – a targeted repair at $400 – $1,800 is the honest call. If the same roof is showing granule loss across multiple planes, curling tabs, or repeated leaks after storms, a partial repair is a stopgap. Replacement with a full Owens Corning system is usually the better dollars-per-year decision. We’ll show you the photos and explain the reasoning before you decide. Call (866) 864-4083 for a free second opinion on any written estimate.
Our Owens Corning Service Process – Step by Step
- 1
Diagnosis. We inspect the roof or wall assembly, check attic ventilation levels, photograph the nailing pattern where accessible, and confirm which Owens Corning products are actually installed.
- 2
Written scope and change orders. Every line item, allowance and material specification arrives on paper before work starts. If scope changes, you get a written change order first – the allowance that isn’t on paper is a surprise waiting for a date.
- 3
Repair or install. Genuine Owens Corning shingles, underlayment and insulation go in to the manufacturer’s installation instructions. Starter course at the eaves, nails in the nail line, batts at full thickness and protected from moisture.
- 4
Test and inspect. Attic ventilation, flashing and drainage get checked. Permits pulled and inspections signed on every eligible job – the permit inspector works for you, not for us, which is why we like him.
- 5
Warranty and the 90-Day Done Right Promise. Manufacturer warranty paperwork gets registered and handed to you. Our written 90-Day Done Right Promise covers the installation. One call brings us back if something’s wrong.
See the difference
Before
After
Before
After
Before
AfterOwens Corning Products We Service & Install in Santa Rosa

We work with the Owens Corning lines that show up most on Santa Rosa homes:
- Oakridge Series asphalt shingles, including on older tract homes where the original roof is due.
- Duration Series architectural shingles, the most common choice on Santa Rosa replacements.
- PINK Next Gen Fiberglas insulation batts for kitchen and bath remodels and attic upgrades.
- FOAMULAR NGX extruded polystyrene rigid insulation for walls, foundations and below-grade applications.
- WeatherLock self-adhering ice-and-water underlayment for valleys, eaves and penetrations.
We install these to the manufacturer’s instructions and match the full assembly so ratings hold.
We Also Service These Brands
We’re a multi-brand construction company, not a single-brand installer. Alongside Owens Corning roofing and insulation, Barrett & Sons Construction Santa Rosa installs KraftMaid cabinetry, Kohler fixtures, GAF roofing and PGT windows and doors. If your project spans trades or your existing home already mixes brands, we work with what’s there and specify replacements that fit the system rather than forcing a swap.
FAQs – Owens Corning Construction Service in Santa Rosa
Yes. Any licensed roofing contractor can install Owens Corning Duration shingles; an authorized dealer designation is a manufacturer program, not a legal requirement. What matters is installation to the manufacturer’s written instructions so the warranty holds. Call (866) 864-4083 to talk through your roof.
It helps with heat more than smoke. PINK Next Gen batts slow heat transfer into living space during Santa Rosa’s hot, dry summers when installed at the right thickness and sealed against air leaks. For wildfire smoke, the bigger gains come from air sealing and filtration, not insulation alone. Call (866) 864-4083 for an assessment.
Look at how widespread the damage is. A few lifted tabs or one flashing leak usually means a targeted repair; granule loss across multiple planes, curling shingles or repeated leaks point toward replacement. We’ll inspect and give you a written recommendation with photos. Estimates are free – call (866) 864-4083.
PINK Next Gen Fiberglas batts are the most common in wall cavities, with FOAMULAR NGX rigid board behind new siding or stucco and in below-grade applications. Both need to be installed at full thickness and kept dry during the remodel. Call (866) 864-4083 to scope insulation with your remodel.
It can be, but the warranty terms differ. Duration shingles installed by a non-certified contractor generally carry the standard manufacturer warranty; factory-certified programs often add coverage. What voids a warranty fastest is installation that breaks the written instructions – wrong nailing, no starter course, mixed-brand assemblies. Call (866) 864-4083 for a warranty-safe installation.
Here are the ranges we quote in Santa Rosa for the Owens Corning work we handle most:
| Project | Typical Santa Rosa Range |
|---|---|
| Roof Replacement (Owens Corning system) | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Prices depend on roof size, pitch, the existing assembly, ventilation needs and material selection. Every quote is written, line-itemed, and locked with written change orders before work starts. Call (866) 864-4083 for an exact quote – estimates are free.
Book Your Owens Corning Service in Santa Rosa, CA
If your Owens Corning roof, insulation or remodel needs a look, call Barrett & Sons Construction Santa Rosa at (866) 864-4083 for a free estimate. We’ll inspect what’s there, explain what’s happening and why, and hand you a written scope with no surprises. Proudly serving local communities for over 29 years, owner-operated since 1998, with the 90-Day Done Right Promise on every job.
Written by the team at Barrett & Sons Construction.












