







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Rosa Homeowners Choose PGT Construction
We provide independent PGT construction service in Santa Rosa: diagnosing and repairing PGT windows and sliding doors, replacing failed impact units, and re-flashing older aluminum installs that were never detailed for this climate. What makes our PGT work different is that we identify the series before we touch it – a WinGuard Vinyl slider and a thermally-broken aluminum EnergyVue unit fail in different places, and the fix differs too. We’re Barrett & Sons Construction, an independent PGT service provider. We are not affiliated with, authorized by, or endorsed by PGT, and we don’t claim to be. We read the same published PGT installation and anchoring specs the manufacturer publishes, source PGT-compatible hardware, and tell you plainly when repair is the wrong answer. Call (866) 864-4083 to schedule a free estimate.
Why Trust Barrett & Sons Construction Santa Rosa for Your PGT Construction?

Our technicians have up to 28 years of experience, and a good share of that has been spent on PGT aluminum and vinyl units in Sonoma County homes. That matters because PGT has made a lot of product families over the years, and the parts don’t cross over. A roller that fits one WinGuard slider generation won’t seat right in another. We check the label, measure the panel, and match the hardware to the unit in front of us rather than guessing from a photo.
Our work is warranty-safe by design. We use OEM or exact-match replacement rollers, weatherstripping, screens and glazing where those parts are still available. We don’t drill new holes in a frame to make a wrong bracket fit, and we don’t cut into a sealed unit. When a part is discontinued, we say so and use dimension-matched aftermarket hardware with the trade-offs explained up front.
Every scope, every allowance, and every price change arrives as a written change order before work starts. Permits get pulled and inspections signed on every eligible job. And the whole thing is backed by our written 90-Day Done Right Promise: if it’s not done right, one call brings us back. Tom Barrett publishes his name, his address, and his license number – look it up before you sign anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Santa Rosa
Santa Rosa sits at the epicenter of California’s wildfire-urban interface, so the windows and doors here aren’t just openings in a wall. They’re part of an ignition-resistant assembly, and when they fail, they fail in ways that matter more than a draft. These are the five calls we get most on PGT units in Santa Rosa.
- Hardened weatherstripping and worn felt pile on sliding glass door tracks. The pile flattens and the weatherstripping stiffens after years of hot, dry summers. Once it’s gone, wind-driven rain gets in during the winter storms and smoke-season air gets in all summer. It’s usually a straightforward replacement with matching pile height.
- Roller and track wear on WinGuard sliders. The panel starts to drag, jumps the track, or won’t latch in high wind. Flat-spotted rollers and grit-packed tracks are the usual culprits, and a panel that won’t latch is a real problem on a wind-rated door. New rollers and a cleaned, re-aligned track fix most of these.
- Seal and glazing failure on impact units. Fogging between the panes on a WinGuard Aluminum or WinGuard Vinyl impact window means the seal is gone. On laminated impact glass, the interlayer can also degrade after years of sun exposure. A fogged unit isn’t fixable in place – the sealed unit gets replaced.
- Water intrusion and rot at the rough opening and sill. This is the one contractors from neighboring cities miss. On older PGT aluminum installs, original flashing or panning was often done to a standard that predates current WUI detailing. Water works in behind the frame, the sill rots, and the leak shows up as a stain on the drywall a room away.
- Hardware and latch failure after a rebuild. In Coffey Park, where nearly every home has been rebuilt with ignition-resistant features, we see PGT units that were installed correctly but whose handles, keepers, and latches wear out on a faster schedule than the glass. Small parts, real function.
PGT Parts & Our Repair-vs-Replace Approach

Parts sourcing for PGT is a matching exercise, not a shopping trip. We identify the series and generation first, then go after OEM or exact-match replacement rollers, weatherstripping, screens and glazing. For discontinued profiles, we use dimension-matched aftermarket hardware. We don’t keep PGT parts in local stock – what a job needs gets sourced for that job, measured against the unit. That’s slower than grabbing a generic roller off a shelf, and it’s the only way the door works right afterward.
Repair versus replace comes down to three questions. Is the sealed unit still sealed? Is the frame and sill sound? And are the parts still available? If a fogged impact unit can’t be re-sealed and the frame is fine, the honest call is replacing that glazed unit, not the whole window. If the sill has rotted through, patching it is money spent twice. We’ll show you what we found and tell you which way we’d go. Call (866) 864-4083 to get a straight answer on your PGT unit.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the PGT series, check the panel and frame for square and movement, and test the latch, roller and weather seal. We look at the sill and rough opening for water staining, not just the glass. You get findings in writing.
- 2
Repair or installation. For repairs, we pull the panel, replace rollers and weatherstripping with matching parts, and clean and re-align the track. For installations, we follow PGT’s published anchoring and flashing specs, which on Santa Rosa homes means detailing to Chapter 7A ignition-resistant standards.
- 3
Test. The panel gets cycled open and closed, we check for a square latch, and we water-test the sill and flashing on any install or re-flash. You see it work before we pack up.
- 4
Warranty and handover. Every completed job is covered by the written 90-Day Done Right Promise. If a latch sticks or a seal leaks, one call brings us back. Every eligible job has its permits pulled and inspections signed.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Santa Rosa
We work on the PGT product families most common in Santa Rosa homes. That includes PGT WinGuard Aluminum impact windows and sliding glass doors, the line most often found on rebuilt homes in Coffey Park and Fountaingrove. PGT WinGuard Vinyl impact windows and doors show up too, and the vinyl frames behave differently from aluminum in sun and wind. We also handle PGT Architectural Series custom aluminum units, and PGT EnergyVue thermally-broken aluminum single-hung and slider units – the ones that turn up on older Santa Rosa homes and where the roller and weatherstripping calls usually come from.
We Also Service These Brands
PGT is one line in a much wider bench. We also service and install KraftMaid cabinetry on kitchen work, Kohler fixtures on baths, GAF roofing systems, and Master Halco fencing. That matters because a window problem is often part of a bigger job: a sill rot that turns into a wall repair, a slider replacement that comes with roof repair if the flashing failed above it. You get one crew and one written scope instead of three contractors handing each other the blame.
FAQs – PGT Construction Service in Santa Rosa

No. We are an independent PGT service provider, not authorized, affiliated with, or endorsed by PGT. We work to the published installation and anchoring specs and use PGT-compatible hardware, and we never claim PGT authorization or a warranty endorsement. That independence is why we can tell you plainly when a repair is the right call and when it isn’t.
Yes, wherever they’re still available – OEM or exact-match replacement rollers, weatherstripping, screens and glazing. For discontinued profiles, we use dimension-matched aftermarket hardware and explain the trade-offs before the work starts. We don’t keep PGT parts in local stock; what a job needs gets sourced for it and measured against the unit. Call (866) 864-4083 with your unit details and we’ll tell you what’s available.
Most roller and weatherstripping repairs are a single-day job, while a full impact window or slider replacement runs two to three days depending on the unit and the flashing work. Scheduling depends on parts, since OEM components get sourced per job. We give you a written scope and timeline up front. Call (866) 864-4083 for a free estimate so you can budget realistically.
We service PGT WinGuard Aluminum and WinGuard Vinyl impact windows and sliding doors, PGT Architectural Series custom aluminum, and PGT EnergyVue thermally-broken aluminum single-hung and slider units. That covers the PGT units most common in Santa Rosa homes from the east side tracts to the fire-rebuild neighborhoods. If you’re not sure which you have, we’ll identify it on site.
Not if it’s done right. We use OEM or exact-match parts where available, don’t alter the frame, and don’t cut into sealed units, which keeps the work warranty-safe. When a part is discontinued and we use a matched aftermarket component, we tell you first. Our own work is covered by the 90-Day Done Right Promise regardless. Call (866) 864-4083 to talk through your unit.
Window replacement in Santa Rosa runs $4,500 – $15,000 depending on count and unit type. Impact window installation runs $8,000 – $25,000, since Chapter 7A ignition-resistant detailing and fire-rated glazing add material and inspection steps. Roof repair, if flashing above a failed window is part of the job, runs $400 – $1,800.
| Service | Santa Rosa Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Call (866) 864-4083 for an exact quote – estimates are free. A written line-item scope with change orders in writing means no surprise invoice at the end.
Book Your PGT Service in Santa Rosa, CA
If a PGT slider is dragging, a WinGuard impact unit has fogged, or the sill on an older aluminum install is showing water damage, call Barrett & Sons Construction Santa Rosa at (866) 864-4083 to schedule your free estimate. A live person answers the phone around the clock. You’ll get a written scope, a fixed price, and the 90-Day Done Right Promise on the back of it.
Written by the team at Barrett & Sons Construction.












