







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tub-to-Shower Conversion Cost in Santa Rosa?
Tub-to-shower conversion in Santa Rosa typically costs $3,500 to $10,000, with most homeowners landing around $5,000 to $7,500 for a standard alcove swap using a premium acrylic or tile system. A basic code-compliant conversion with a prefab pan and acrylic surround starts near the low end; a tiled walk-in shower with a bench, niche, frameless glass and upgraded drain runs toward the top. Price depends on size, drain location, waterproofing method, and whether any plumbing behind the wall needs correcting once we open it up.
Every price we quote arrives in writing before work begins, and every scope change comes as a written change order first. You’ll know what it costs before a single tile leaves the box.

Key Takeaways
- Most Santa Rosa tub-to-shower conversions fall between $3,500 and $10,000.
- Prefab acrylic systems run the lowest; custom tile walk-ins run highest.
- Waterproofing and drain re-routing are the two biggest cost drivers.
- Permits and inspections are included on every eligible job – the inspector works for you, not for us.
- Free estimates with no trip charge inside Sonoma County: call (866) 864-4083.
Tub-to-Shower Conversion Cost Breakdown (2026)
Here’s how the line items break down for the Santa Rosa market this year. These are real ranges, not teasers.
| Line Item | Typical Range (Santa Rosa, 2026) |
|---|---|
| Full tub removal and haul-off | $250 – $600 |
| Plumbing rough-in and drain relocation | $400 – $1,500 |
| Shower pan and waterproofing | $500 – $1,800 |
| Prefab acrylic surround and pan system | $900 – $2,500 |
| Tiled walls with premium tile | $1,800 – $5,000 |
| Valve, trim and showerhead upgrade | $300 – $900 |
| Glass door or frameless enclosure | $600 – $2,200 |
| Permit and inspection fees | $200 – $700 |
| Labor (installation) | $1,200 – $3,500 |
Added together, that’s where the $3,500 to $10,000 total comes from. The low end is a prefab acrylic system in a standard 60-inch alcove with no plumbing surprises. The high end is a tiled walk-in with a frameless glass door, a bench, a recessed niche, and a drain that had to move. A full walk-in shower build that expands the footprint sits in our walk-in shower installation cost guide – those numbers start higher because the framing changes.
If you’re planning a bigger bathroom refresh at the same time, the bathroom remodeling cost guide lays out the full $9,000 to $28,000 range for a complete gut. A tub-to-shower conversion is often the smartest single spend inside that scope because it fixes the most-used fixture in the room.

What Affects Tub-to-Shower Conversion Pricing in Santa Rosa
- Shower size and alcove layout. A standard 60-inch tub alcove is the cheapest conversion because the footprint doesn’t change. Push to a 36-inch by 60-inch tiled walk-in with a bench and the framing, waterproofing and tile all climb. Expanding the footprint into an adjacent closet adds framing, drywall and permit scope.
- Drain location. If the existing tub drain sits under the wall end and your new shower pan drains at the center or entry side, the drain has to move. That’s a plumbing line change behind the wall and can add $400 to $1,200 on its own. In homes around the Santa Rosa service area built before 1980, cast iron and galvanized drains sometimes need replacement once they’re exposed – better to know now than find out mid-tile.
- Waterproofing method. We use a bonded sheet membrane system and flood-test it before tile. That’s a line item, not a corner cut. Skipping it is how showers fail in five years.
- Tile selection. Porcelain tile in a standard size runs budget-friendly. Large-format slabs, natural stone, mosaic accent strips and patterned tile all raise both material and labor. We install premium brands you can look up by name, so you know what you’re paying for.
- Glass and enclosure. Frameless glass with a custom cut runs higher than a framed door or a simple curtain rod. Most customers upgrading from a tub want glass, so plan for it.
- Hidden conditions. Rot behind the tub surround, failing valve cartridges, or a supply line that was never properly supported all surface once the old tub comes out. In Santa Rosa homes, we regularly see wet rot along the back wall of alcove tubs where the old caulk failed and water got behind the tile over the years. A written change order covers any of this before work continues.
How Does a Tub-to-Shower Conversion Work?
We start by protecting the path and floors, then shut off water and remove the tub, surround and any failing backer. Once the wall cavity is open we check the framing, the valve, the drain and the supply lines. Any rot or failing plumbing gets addressed and documented before the new waterproofing goes in.
Next comes the shower pan and the membrane – flood-tested, then tiled, then cured. The valve trim and showerhead go in, glass gets templated and installed, and we run the permit inspection. The last step is a walkthrough with you, checking the drain, the pressure, the caulk lines and the waterproofing signs. Most alcove conversions take three to five working days once materials are on site; tiled walk-ins with custom glass take longer because of the template and cure time.
Every eligible job gets a permit pulled and an inspection signed. If a contractor tells you permits are optional on a tub-to-shower conversion, that’s a red flag – the permit protects you at resale and it’s part of what a licensed job looks like.
Waterproofing, Safety, and What’s Behind the Wall
A shower is a wet room. Water is supposed to drain, and it’s supposed to stay behind the tile. Getting the waterproofing right is the single most important part of the job, and we don’t shortcut it.
If your home has an older electrical circuit near the shower (a light or fan switch inside the wet zone, for example), that scope involves electrical work. That’s a job for a licensed electrician, not a handyman, and we’ll flag it in writing rather than cutting into a circuit ourselves. Same for any gas appliance or water heater tied into the bathroom closet. The permit process in Santa Rosa routes those to the right trade, and you should never let someone unlicensed touch a panel or a gas line.
On the shower valve itself, we install and test – we don’t teach you to pull a cartridge or crack a valve body open. High-pressure water and a stripped cartridge can cause a flood fast, and it’s a fifteen-minute fix for a pro versus a weekend of damage for a homeowner.
What Drives the Price Up or Down in Santa Rosa
Here’s where the swings happen on a real job.
- Prefab vs. tiled. A prefab acrylic pan and surround is the budget route and it’s durable. Tiled walls cost more but let you design a walk-in that matches the rest of the house. The price gap is real – expect $1,500 to $2,500 between the two if the tile is upgraded.
- Drain and valve condition. If the existing valve is a worn old two-handle, upgrading to a modern single-handle thermostatic valve adds $300 to $900. Doing it now, while the wall is open, is cheaper than doing it later.
- Rot and hidden damage. This is the wildcard. We don’t guess on this – we open the wall, photograph what we find, and issue a written change order before touching it. An allowance that isn’t on paper is a surprise waiting for a date, and we don’t work that way.
- Glass style. Frameless glass is the most requested upgrade and the most expensive. A framed pivot door or a curtain rod saves $600 to $1,500.
- Permit timeline. Santa Rosa permit turnaround affects the schedule, not usually the price – but a fully permitted, inspected job is worth the wait because it protects your resale.
Is It Cheaper to Repair or Replace?
If your tub is sound and the surround is intact, a repair is cheaper than a conversion. But if the tub is chipped, the surround is cracking, or you’re stepping over a 15-inch wall every morning, a conversion is usually the better spend. A $3,500 to $10,000 tub-to-shower conversion replaces the fixture you use most and updates the waterproofing that’s already been leaking behind the tile for years.
On a shower that’s already in place, a replacement usually costs less than a fresh conversion because the plumbing and pan stay put. Our shower replacement cost guide covers that $3,000 to $8,500 range.
How Can I Save on Tub-to-Shower Conversion in Santa Rosa?
- Keep the footprint. Staying in the existing alcove avoids framing and drain moves. That saves $800 to $2,000.
- Choose a quality prefab system. A premium acrylic pan and surround over tile lowers material and labor while keeping a clean look.
- Upgrade the valve while the wall is open. Doing it during the conversion costs less than a separate service call later.
- Ask for a written scope and allowance. Fewer surprises, lower risk of budget creep.
- Use the standing offers. We publish $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount.
- Book off-peak. Scheduling outside the spring and fall rush often lets us lock in material pricing.
Every estimate is free and written. Call (866) 864-4083 and we’ll walk the bathroom with you, measure, and quote the exact scope – no phone-quote-then-switch. If you’re comparing bids, take us up on the free second opinion. We’ll tell you what’s missing in the other quote.
Why Homeowners in Santa Rosa Call Barrett & Sons
We’re owner-operated, and the name on the truck matches the name on the contract. Every eligible job includes permits pulled and inspections signed. Every price change arrives as a written change order before work proceeds. And every completed job is backed by the 90-Day Done Right Promise – if something isn’t right, one call brings us back.
Our crew members are background-checked and carry our name. We install premium brands, so you know what tile and fixtures you’re getting. Our crew members have up to 28 years of experience, and they’ve worked in Santa Rosa bathrooms long enough to know what fails and why.
If you’re also considering a larger refresh, the home addition cost guide covers adding a bath to the plan. If the bathroom adjoins a kitchen you’re updating, the kitchen remodel cost guide walks through the $14,000 to $45,000 range, and a small kitchen remodel cost guide covers the $9,000 to $20,000 scope.
How Do Santa Rosa Permits Affect the Final Price?
Permits add roughly $200 to $700 to the job and can add a few days to the schedule, but they’re not optional. The inspector works for you, not for us. A permitted conversion protects your resale, keeps the work inspectable, and makes sure the plumbing and electrical are done to code. If the last contractor you used told you permits were optional, that should tell you something.
We pull the permit, meet the inspector, and get the sign-off. That’s part of the job, not a line item you negotiate away.
FAQs – Tub-to-Shower Conversion Cost
How much does a tub-to-shower conversion cost in Santa Rosa?
Most conversions run $3,500 to $10,000, with the average around $5,000 to $7,500. Prefab acrylic systems sit near the low end; tiled walk-ins with frameless glass sit near the top. Call (866) 864-4083 for a free written estimate on your bathroom.
Can you convert my tub to a shower without moving the drain?
Yes, in most standard alcove bathrooms the drain stays put and the cost stays lower, usually in the $3,500 to $6,000 range. If the new pan needs a center or entry-side drain, expect to add $400 to $1,200 for the plumbing change.
How long does a tub-to-shower conversion take?
Most alcove conversions take three to five working days once materials are on site. Tiled walk-ins with custom glass take a week or more because of template and cure time. Call (866) 864-4083 and we’ll give you a schedule based on your actual bathroom.
Is a walk-in shower cheaper than keeping the tub?
Not cheaper upfront – a tub-to-shower conversion runs $3,500 to $10,000 while keeping a working tub costs nothing today. But if the tub is worn, the surround is leaking, or you’ll age in place, the conversion replaces failing waterproofing and makes the bathroom usable for years. Our walk-in shower repair guide covers smaller fixes if the shower is already there.
Do you need a permit for a tub-to-shower conversion in Santa Rosa?
Yes in most cases, and the permit adds roughly $200 to $700. We pull it and get the inspection signed on every eligible job. If a contractor says permits are optional, that’s a warning sign – call (866) 864-4083 for a straight answer.
What’s the most common surprise in a Santa Rosa tub-to-shower conversion?
Hidden water damage behind the old surround, usually in the $500 to $2,500 range depending on how far it spread. We don’t guess – we open the wall, show you, and issue a written change order before touching it.
Do you offer a warranty?
Yes – every completed job is backed by the 90-Day Done Right Promise, written on the contract. If something isn’t right, one call brings us back.
Ready for a Straight Answer on Your Bathroom?
Call (866) 864-4083 for a free, written estimate. We’ll measure your bathroom, walk through the actual scope, and quote real numbers – $3,500 to $10,000 for most Santa Rosa conversions, with the line items spelled out. No phone quote that changes at the door. No surprise invoice at the end. Just a written scope, written allowances, and written change orders before a single nail moves. A live person answers around the clock, and there’s no trip charge inside the county. If you’re in Rohnert Park, Sebastopol, Windsor or anywhere in the service area, we’ll come out and take a look.
Pricing reflects the Santa Rosa market as of 2026. Barrett & Sons Construction Santa Rosa offers free estimates – call (866) 864-4083.
What Our Customers Say
"His sons run the crews and they were in our house for four months. Not once did I feel I had to be home to keep an eye on things."
- Camila Fuentes"Full kitchen down to the studs. He found the previous owner had done the wiring himself and it was genuinely dangerous, showed me, and put it right properly rather than boxing it back in."
- Augustus Nwachukwu"Came back a year later to sort a door that had dropped as the frame settled. No charge and no argument about whether it was covered."
- Thaddeus Oyelowo












