







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Santa Rosa Homeowners
If your windows fog up between the panes, your front door sticks every July, or that sliding patio door has stopped gliding the way it did when it was new, it’s not your imagination and it’s not going to fix itself. Santa Rosa sits in a climate that stresses wood and vinyl hard: hot inland summers that push framing open, cool wet winters that find every failed seal, and wildfire-season smoke that seeps through gaps you can’t even see. We install and replace windows and doors across Santa Rosa using Andersen and Marvin products you can look up by name, with our technicians bringing up to 28 years of experience to each job. Permits get pulled, inspections get signed, and every scope is written down before the first screw goes in. Call (866) 864-4083 and we’ll walk through it with you.
Key Takeaways
- Window replacement in Santa Rosa runs $4,500 – $15,000; impact window installation runs $8,000 – $25,000 depending on count and glass package.
- We install Andersen and Marvin windows and doors, and we pull the permits that protect your resale value.
- Every job is backed by the 90-Day Done Right Promise, written on the contract, not buried in it.
- A live person answers the phone, any hour, any day.
What Our Windows & Doors Service Includes

Window Installation
Window installation means cutting out the old unit, correcting the rough opening if the framing has moved, flashing it correctly, and setting a new window square and level before trimming it out. You need full installation when you’re changing window sizing, dealing with rot or a failing wall assembly, or building new construction like a home addition. We measure on site rather than from a drawing, dry-fit the unit before fastening, and follow Santa Rosa’s requirements for flashing and weather-sealing so the inspection passes the first time. If the opening needs rebuilding, that shows up in your written scope before anyone touches a saw.
Door Installation
Door installation is everything from hanging a new entry door and hardware set to framing in a slider where there was once a fixed wall. You need it when a door no longer seals, when the frame itself has twisted, or when you’re updating an older entry that’s been patched more than once. We hang pre-hung and slab doors, plumb the frame, cut and fit the strike so the latch catches clean, and confirm the door swings without binding through the whole season, not just the day we install it. Exterior doors get new flashing and sill pans; no shortcuts you’ll pay for later.
Window Replacement
Window replacement swaps an existing window for a new one in the same opening, and it’s the right call when single-pane aluminum units have lost their seals or you’re tired of playing weatherstripping roulette every fall. Replacement is also the moment to improve efficiency, so we look at glass package and frame material together instead of just matching whatever’s there. In Santa Rosa we do a lot of retrofits on homes built in the ’50s through the ’80s, where a modern frame-to-glass seal makes a real difference on the summertime thermometer. Everything is measured, written, and confirmed before ordering.
Impact Windows & Doors
Impact windows and doors use laminated or tempered glass and reinforced frames designed to hold up to severe weather and debris. You need them when you want the added protection during wildfire season, high-wind events, or when local building requirements call for it. Our technicians review the wind-load and exposure requirements for your specific property, order the assemblies rated for the job, and install them with the anchoring and flashing the rating depends on. The glass is only as good as the install, so we treat both as part of the same written scope.
Energy-Efficient Windows
Energy-efficient windows pair low-E glass, argon or krypton fill, and thermally broken frames to cut the heat gain that drives summer cooling bills in Sonoma County. You need them when rooms facing west run hot in the afternoon or when condensation builds up on the interior glass every winter. We match the glass package to the window’s orientation and shade, so a north-facing unit isn’t spec’d like a west-facing one just to keep the order simple. The goal is comfort you can feel and a documented performance spec in writing.
Sliding & Patio Doors
Sliding and patio doors are the big glass panels that get the most use and take the most wear in a house. You need service or replacement when the track has worn, rollers are grinding, or the frame has settled enough that the door won’t latch. We install new sliders and patio doors, replace tracks and rollers where the panel itself is still sound, and re-flash the opening so water has somewhere to go besides the threshold. Given the square footage of glass, these doors are the biggest thermal hole in most homes, and they’re worth addressing properly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We install Andersen and Marvin windows and doors, and that matters because both brands build a wide range of products and a lot of contractors don’t know which series fits which application. An Andersen 400 Series and a Marvin Elevate might both get called “replacement windows” in a bid, but they’re different products with different frame depths, glass options, and hardware systems. Knowing where each line wears, and which one belongs in a Santa Rosa ranch house versus a wine-country custom, is part of the job. When we write the scope, we name the exact product line and the exact glass package, so you’re comparing apples to apples instead of guessing.
Downstream, the doors we hang and the windows we set sometimes live next to interior work, and we source fixtures from names like Schluter and Grohe for threshold transitions and hardware where they make sense, because those are components you can look up instead of mystery parts from a van. What we don’t do is claim to be a dealer or carry parts inventory; we order the right components for your job and install them. Whether you have Andersen, Marvin, or any other make already in place, we can help you figure out what’s worth keeping and what’s ready to be replaced.
Signs You Need Windows & Doors Right Now
- Fog or condensation between the panes. That’s a failed seal, and the gas fill is gone with it. The window is no longer insulating the way it was rated to, and it won’t come back on its own.
- Water staining or soft trim around a door or window. Usually it means flashing or caulk has been letting water in for a while. By the time you see the stain, the framing behind it may need attention too, so this is worth a look before the next rain.
- A door that sticks, drags, or won’t latch. Seasonal sticking is common when framing dries and shifts; a door that sticks all year is telling you the frame has moved. It’s a security issue as much as a comfort one.
- Daylight or a draft you can feel at the edges. If you can see it or feel it, cold air and smoke are getting through. This gets worse, not better, and it’s the easiest thing to check this weekend.
- Glass that rattles or hardware that won’t lock. Loose glazing and failing locks are both correction items before the weather turns. A rattling window in a high-wind event is a vulnerability, not just a nuisance.
Our Windows & Doors Process – Step by Step
- 1
Site visit and measurement. We come out, measure every unit on site, check the rough openings, and look at how the existing flashing was done. You get a written scope with product lines and glass packages named, not a one-line estimate.
- 2
Written scope and change orders. Every allowance and every price is in the document before we order anything. If the opening turns out to need framing repair once we’re in, that arrives as a written change order before work proceeds. No surprise invoices at the end.
- 3
Permits pulled and scheduled. Where the work is eligible, we pull the permits and get the inspections on the calendar. The inspector works for you, not for us, and that’s a feature; it’s the check on our own work.
- 4
Installation day. We protect floors and furniture, remove and dispose of the old units, set and flash the new ones to spec, and clean up every day, not just at the end. Crew members are background-checked and carry the Barrett & Sons name.
- 5
Inspection and the 90-Day Done Right Promise. We walk the finished job with you, confirm the doors swing and the windows latch, and hand you the signed contract with the 90-Day Done Right Promise on it. If something’s not right in that window, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Santa Rosa?

A typical window replacement in Santa Rosa runs $4,500 – $15,000 depending on how many units and the glass package. Impact window installation runs $8,000 – $25,000 because the assemblies and anchoring are heavier. Add doors and you’re pricing each unit on its own, but the same rule applies: the count, the product line, and the trim-out drive the number.
What moves the price: the number and size of units, the frame material, whether the rough opening needs repair, the glass package, and whether we’re dealing with a retrofit or a full-frame tear-out. Avoiding overpaying means getting the scope in writing with product lines named, so you can compare real bids instead of guessing which estimate is actually lower. Our free estimate includes a site visit, on-site measurements, a written line-item scope, and a clear list of the allowances. Call (866) 864-4083 to schedule yours; estimates are free, and there’s no trip charge inside the county.
Windows & Doors Near Santa Rosa – Our Service Area
We work throughout Santa Rosa and the surrounding towns. That includes Larkfield-Wikiup service area just north, plus Windsor, Healdsburg, Cloverdale, Rohnert Park, Petaluma, Sonoma, and down into Napa, Novato, American Canyon, and San Anselmo. Call volumes in the outer towns can add a day to scheduling, but the site visit is usually quick. You can find your town on our Santa Rosa service area page, and if you’re nearby in Windsor service area, we’re happy to talk timing. If you’re also thinking about paving or fencing while we’re out, those are separate conversations.
Serving Santa Rosa, CA – Our Local Coverage Area
We serve Santa Rosa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Santa Rosa

It’s the work of installing, replacing, and repairing the exterior glass and door assemblies in your home, from a single window to a whole-house replacement. We measure on site, order the right product line, flash and seal the opening, and install to spec. Permits get pulled where the work is eligible, so the job is documented and inspection-verified. Call (866) 864-4083 with your address and we’ll schedule a free estimate.
A single window is usually a few hours; a full-house window replacement typically runs a few days, and doors range from half a day to a day each depending on whether the opening needs work. Impact units and sliding patio doors take a bit longer because the anchoring and flashing are heavier. We tell you the expected schedule in the written scope so you can plan around it. Call (866) 864-4083 to get a firm timeline for your specific job.
Window replacement runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000 depending on unit count, frame material, and glass package. Doors are priced per unit, and any framing repair inside the opening shows up as a written change order before work proceeds. The free estimate includes a site visit and a written line-item scope. Call (866) 864-4083 for an exact quote, because estimates are free.
Yes, we install Andersen and Marvin products and know the different series well enough to spec the right one for your opening and climate. We don’t claim to be a dealer or carry a parts inventory; we order the correct product line for your job and install it to the manufacturer’s spec. If your home already has one of those brands, we can work with what’s there. Call (866) 864-4083 and we’ll talk through your options.
For a broken pane, a door that won’t secure, or damage that leaves the opening exposed, we can help you get it stabilized and scheduled quickly. A live person answers the phone any hour, any day, so you’re not leaving a message in a storm. For planned replacements there’s no same-day promise; a proper install takes a site visit and a written scope first. Call (866) 864-4083 and we’ll tell you what’s realistic for your situation.
Every completed windows and doors job is backed by the 90-Day Done Right Promise, written on the contract: if something’s not done right, one call brings us back to make it right. Manufacturers’ product warranties also apply on top of that, and we hand you the documentation. That written promise is why we don’t bury it in fine print. Call (866) 864-4083 for a free estimate with the promise spelled out on the contract.
Clear the work area the night before, move wall hangings and breakables away from the windows, and make sure the crew can get to the openings without moving furniture. We protect floors and furniture during the install and clean up each day, but a little prep on your end makes the day smoother. If we’re pulling permits, we’ll confirm the inspection window with you. Call (866) 864-4083 and we’ll walk you through what to expect.
Schedule Your Windows & Doors Service in Santa Rosa Today
If you’re ready to get real windows and doors on the house, call (866) 864-4083. We’ll come out, measure everything, and hand you a written scope with the product lines and prices named, backed by the 90-Day Done Right Promise. A live person answers any hour, and there’s no trip charge inside the county. Free estimate, no obligation, no surprise invoices. home
Written by the team at Barrett & Sons Construction.












